Care Guides

Make sure your surface is smooth, clean, dry and free of any dirt or dust. Rubbing alcohol and a paper towel usually does the trick.

Put the vinyl face down and rub the backing paper with a scraper or plastic store card.

Slowly peel the paper away from the transfer tape and vinyl decal, being careful to push any vinyl back down that lifts with the paper.

Apply the vinyl & tape to your surface, and smooth down again with your scraper tool.

Once you’re sure all of the vinyl is stuck to your surface, slowly peel away the transfer tape, again being careful of any vinyl that lifts.

Washing your tumbler in the dishwasher is doable, but not recommended. Over time, the heat will break down the adhesive. We do recommend for the longevity of the design that you hand wash your cup, trying not to use abrasive scrubbers.

Mix a dash of dish soap and water in a bowl or spray bottle and apply to glass. Remove the film from the back of the window cling if it is still there (the film is cloudy).

Apply the cling to the window and squish out the water and soap with a squeegee or microfiber/paper towel. You may need to press and hold on the edges of the cling to help curves flatten out.